This content originally appeared on Jack Franklin and was authored by Jack Franklin
Something I've not covered much so far is some of the newer parts of JavaScript. That is, methods in ECMASscript 5 that are not so commonly used due to browser support, and of course the new features in ECMAScript 6. Today I want to take a look at the new Array methods in ES5, such as map and filter.
If you'd like to know the browser support for these methods, it's actually pretty good. This site shows the support, and for most the only blip is IE 8 and lower. And if you do need to support older browsers, shims are available. Let's have a look at the Array methods introduced in ES5. This wont be an in-depth look exploring the ins and outs of every method, but more a quick summary over them.
The first is indexOf. As you might suspect, it searches the array to find the index of the passed in element:
var arr = [1, 2, 3 ,4];
console.log(arr.indexOf(2)); // 1
console.log(arr.indexOf(5)); // -1
If the element doesn't exist, -1 is returned. Be aware that indexOf finds the first index, if the element is in the array more than once:
var arr = [1, 2, 3 ,4, 2];
console.log(arr.indexOf(2)); // 1
There is also lastIndexOf that finds the last index:
var arr = [1, 2, 3 ,4, 2];
console.log(arr.lastIndexOf(2)); // 4
Next is every. The mdn documentation sums it up best:
"
everyexecutes the provided callback function once for each element present in the array until it finds one where callback returns a false value. If such an element is found, theeverymethod immediately returnsfalse. Otherwise, if callback returned atruevalue for all elements,everywill returntrue."
Lets take a look at an example:
var arr = [1, 2, 3, 4];
console.log(arr.every(function(x) {
console.log(x);
}));
// 1
// false
Here the callback function logs one, but then doesn't return a truthy value, so every exists and returns false. It will loop over every element if our callback function returns true:
var arr = [1, 2, 3, 4];
console.log(arr.every(function(x) {
console.log(x);
return true;
}));
// 1
// 2
// 3
// 4
// true
Next we have some. some executes a callback function once for every element present in the array until it finds a value for which the callback returns true, at which point some returns true. If no value is found, some returns false. Here I use some to test if any elements in the array are even:
var arr = [1, 2, 3 ,4];
console.log(arr.some(function(x) {
return x % 2 == 0
}));
// true
It returns true because at least one element made the callback function return true. If none of them do, it returns false:
var arr = [1, 3, 5, 7];
console.log(arr.some(function(x) {
return x % 2 == 0
}));
Next is forEach, which is very straight forward. It takes a function and calls that function for each element in the array:
var arr = [1, 2, 3, 4];
arr.forEach(function(x) {
console.log(x);
});
// 1
// 2
// 3
// 4
map is similar to forEach in that in loops over all elements in the set and calls the callback function on them, however map will return an array which is the result of the callback function for each element. For example:
var arr = [1, 2, 3, 4];
var newArr = arr.map(function(x) {
return x * x;
});
console.log(newArr);
// [1, 4, 9, 16]
Here I use map to square each number in the array, and it then returns that new array.
We can use filter to trim down our arrays to elements that only match specific criteria. filter executes the callback function on each element, and will only add that element to the new array if the callback function returns true. Below I filter out any numbers that are not even:
var arr = [1, 2, 3, 4];
var newArr = arr.filter(function(x) {
return x % 2 == 0;
});
console.log(newArr);
// [2, 4]
The callback function only returns true for the even numbers, so the array filter returns contains just those.
Next is the slightly more complex reduce.
"Apply a function against an accumulator and each value of the array (from left-to-right) as to reduce it to a single value."
Taken from the MDN.
The callback function for reduce is usually used with two arguments. The first is the previous value in the array, and the second is the next value. I find I understand this best with an example, so here is how we would use reduce to sum all the elements in an array:
var arr = [1, 2, 3, 4];
console.log(arr.reduce(function(x, y) {
return x + y;
}));
// 10
And the arguments are passed through like so:
(0, 1), (1, 2), (3, 3), (6, 4)
To give us an answer of ten. The MDN article on reduce is very thorough, so I highly recommend giving that a read if you're slightly confused.
Finally there is reduceRight, which is the same as reduce but starts on the right hand side, not the left.
var arr = [1, 2, 3, 4];
console.log(arr.reduceRight(function(x, y) {
return x + y;
}));
// 10
Here the arguments are processed from right to left:
(0, 4), (4, 3), (7, 2), (9, 1)
I hope this article has helped, if like me you'd not taken the time to explore some of these newer features, or perhaps had mistakenly dismissed them because you didn't realise how comprehensive the browser support is (other than our old friend IE8, of course).
This content originally appeared on Jack Franklin and was authored by Jack Franklin
Jack Franklin | Sciencx (2013-01-27T00:00:00+00:00) ECMAScript 5 Array Methods. Retrieved from https://www.scien.cx/2013/01/27/ecmascript-5-array-methods/
Please log in to upload a file.
There are no updates yet.
Click the Upload button above to add an update.