This content originally appeared on flaviocopes.com and was authored by flaviocopes.com
One usage of resistors is to create a voltage divider.
If you put 2 resistors in series (one after another) in a circuit, like this:
and you measure the voltage drop after the first resistor, you can observe that if the resistors have the same resistance value, for example 1kΩ, the tension after the first resistor is exactly half the original tension.
This is because in a circuit the sum of all voltages around any closed loop must equal zero (this is Kirchhoff’s voltage law).
The difference in voltage measured before the first resistor, and after the second resistor, is ~9V, the voltage provided by the battery.
If you double the resistance of the second resistor, the voltage drop after the first resistor is 3V, while the voltage drop after the second is 6V:
This means that we can adjust the voltage served to a component by using resistors.
The formula to calculate the tension between the two resistors, R1 being the first one linked to the + pole of the battery and R2 the second one, is: V * (R2 / (R1 + R2)).
This content originally appeared on flaviocopes.com and was authored by flaviocopes.com
flaviocopes.com | Sciencx (2021-03-21T05:00:00+00:00) Electronic Project: Build a voltage divider. Retrieved from https://www.scien.cx/2021/03/21/electronic-project-build-a-voltage-divider/
Please log in to upload a file.
There are no updates yet.
Click the Upload button above to add an update.