This content originally appeared on DEV Community and was authored by Daniel Idoko
Introduction
The TCP/IP network model is referred to as a network suite. It is referred to as a suite because it consists of different networking protocols working together to transmit data packets from host A to host B and ensure a reliable connection between networks. These protocols are arranged in a hierarchy or stack, where the higher-level protocols make use of the protocols beneath them. TCP/IP is the backbone protocol on which the Internet runs and a core protocol for computer networking in general.
Definition of Terms
TCP - Transmission Control Protocol
TCP is a connection-oriented protocol that provides reliable data transfer, error detection and correction, segmentation, and reassembly. It operates at the Transport Layer of the TCP/IP Network Model and is a core protocol in the Internet protocol suite. TCP is often compared to UDP (User Diagram Data), but TCP is generally preferred in networks requiring high reliability due to its robust error-handling mechanisms.
IP - Internet Protocol
You've definitely heard the term "IP address" before. The Internet Protocol is a core protocol for transmitting data packets because it handles the tasks of addressing and routing packets. Every host must have an IP address through which packets can be addressed to it and every device with an IP address is considered a host. There are currently two standard versions of the Internet Protocol: IPv4 and IPv6.
Packets
The term "packets" is used in various places in this article. It simply refers to small units of data. When transmitting data, large data sets are broken down into packets to meet the Maximum Transfer Unit (MTU) of a particular network. Each packet is framed with a header, which consists of its addressing information such as its source IP address and destination IP address.
A Practical Look at the TCP/IP Networking Model
In this section we'll take a shallow look at an instance of a Computer Network in action to better understand the role of the TCP/IP network model.
Assuming you have two laptops and need to transfer some files from Laptop A to Laptop B, you'll be presented with a couple of options (both wired and wireless). Let's assume you choose an Ethernet cable for the transfer. Modern systems have streamlined the data transfer process, making much of it opaque to the user. In this chapter, we'll delve deeper into the process of your files traveling from Laptop A to Laptop B.
After plugging each end of the Ethernet cable into both laptops, the next step is to assign each laptop an IP address within the same network range. For example, Laptop A could be assigned 10.10.10.1, while Laptop B would be assigned 10.10.10.2. This creates a private IP address range through which both laptops can transfer data addressed to each other's IP addresses. Each laptop automatically learns the other's IP address via an ARP (Address Resolution Protocol) request, and a connection is then established.
When you transfer files from Laptop A, addressed to Laptop B's IP address, the data passes through a series of TCP network layers to reach its destination. Let's delve into these layers and see their role in data transmission.
The TCP/IP Network Layers
The TCP/IP network model conventionally consists of four(4) distinct network layers: Application layer, Transport layer, Network layer, and Link layer. It's a simplified version of the original OSI (Open Systems Interconnection) network model, which consists of seven(7) layers: Application layer, Presentation layer, Session layer, Transport layer, Network layer, Data link layer, and Physical layer. The TCP/IP layer model combines some layers from the OSI model for simplification. Let's explore the four layers of the TCP/IP Network Model:
1. Link Layer
This layer is also known as the Network Interface Layer or Network Access Layer. It's responsible for framing and transmitting data bits over a physical medium. This can be transmitted wirelessly via electromagnetic waves or physically via wired signals. Examples of physical components include cables, optical fibers, radio waves, etc. In our practical example from the previous section < Practical Look at the TCP/IP Networking Model >, this would be the Ethernet cable used to connect the two computers.
Framing and Transmission is handle by two separate components of the Link layer:
- Link Layer Control - Handles framing the packets
- Media Access Control - Handles transmitting the packet to physical components.
2. Network or Internet Layer
This layer consists of protocols responsible for the logical transmission of data over a network. Examples of these protocols include: Internet Protocol (IP), Internet Control Message Protocol (ICMP), and Address Resolution Protocol (ARP). Each of these protocols plays a specific role in transmitting data.
In our practical example from the previous section < Practical Look at the TCP/IP Networking Model >, we assigned different but similar IP addresses to each laptop. The similarity (10.10.10.x) indicates that they belong to the same subnet. As Laptop A transmits a data packet to Laptop B, the packet will be framed in Laptop A's Link Layer Control. The frame will contain Laptop B's IP address as the destination.
If there were more than two laptops connected to the network, communication would be impossible without IP addresses. IP addresses are essential for each laptop to know how to send files to others within the network.
3. Transport Layer
This layer consists of protocols that provide reliable data transfer from one host in a network to the endpoint or receiving host of the network. It is concerned with end-to-end communication. TCP, UDP, and SCTP (Stream Control Transmission Protocol) are examples of Transport layer protocols.
End-to-end communication means sender-to-receiver communication. In our practical example from the previous section < Practical Look at the TCP/IP Networking Model >, we looked at a very simple network topology involving only two devices. In the Internet or a more complex network topology, data does not always travel directly from one host to another. It usually hops through a series of routes before reaching its destination host.
Communication between one route and the next route is referred to as hop-to-hop communication while the overall communication between the source host and destination host is the end-to-end communication.
As packets travel through these complex topologies, they are always aware of their next hop through a Layer 2 header using a MAC (Media Access Control) address and their destination host through a Layer 3 header using an IP address. Every IOT device is assigned a unique MAC address at the time of manufacture.
4. Application Layer
This layer combines the Session and Presentation layers from the OSI layer model. The Application layer consists of protocols that work directly with the end user's applications, providing various network services to these applications. Some Application layer protocols include SSH (Secure Shell), FTP (File Transfer Protocol), HTTP (Hypertext Transfer Protocol), DNS (Domain Name System), SNMP (Simple Network Management Protocol), and many more.
Conclusion
In this exploration of the TCP/IP Network Model, we've delved into the fundamental layers and protocols that underpin modern computer networking.
We've examined how data flows through the network, starting at the Application layer and traversing the Transport, Network, and Link layers. We've also explored the roles of key protocols like TCP, IP, and ARP in ensuring reliable and efficient communication.
By understanding the TCP/IP model, you gain a deeper appreciation for the complex processes involved in modern computer networking. This knowledge can be valuable for troubleshooting network issues, designing network architectures, and staying informed about emerging networking technologies.
This content originally appeared on DEV Community and was authored by Daniel Idoko
Daniel Idoko | Sciencx (2024-09-27T21:54:28+00:00) TCP/IP Networking Model. Retrieved from https://www.scien.cx/2024/09/27/tcp-ip-networking-model/
Please log in to upload a file.
There are no updates yet.
Click the Upload button above to add an update.