This content originally appeared on DEV Community and was authored by lykins
My first task in setting up my Nomad Image Factory is creating the Nomad cluster.
Lab:
- 3 : Mini Computers
- N100 CPU
- 16 GB Memory
- 2 : 1GB Nics
- Proxmox
Nomad Cluster:
- Simple Cluster
- 3 Nodes with Server and Client Role
- 2 CPU
- 4 GB Memory
- Ubuntu 24
Installing Nomad:
I take the easy way to install Nomad.
sudo apt-get update && \
sudo apt-get install wget gpg coreutils
wget -O- https://apt.releases.hashicorp.com/gpg | \
sudo gpg --dearmor -o /usr/share/keyrings/hashicorp-archive-keyring.gpg
echo "deb [signed-by=/usr/share/keyrings/hashicorp-archive-keyring.gpg] https://apt.releases.hashicorp.com $(lsb_release -cs) main" \
| sudo tee /etc/apt/sources.list.d/hashicorp.list
sudo apt-get update && sudo apt-get install nomad
After installing you should be able to check the Nomad version to confirm.
Additional Notes:
If you want to do a manual install and setup, I would recommend following this guide : HERE :).
If sticking with using the package manager, just a few notes - atleast on he Ubuntu side. I would not think there is a difference with RHEL-based.
Service
It is setup up with a default config. If this was a server only node, I would have set up a nomad user and group, and change root in both places nomad.
Other note is the nomad environment and config file. They are set up in /etc/nomad.d. If changing you'll need to update those values in the service config.
Config
My favorite thing about Nomad and what drew me to it was its use of HCL. My background prior to messing with Nomad is with Terraform + Packer, so it is a common syntax I am already familiar with.
The common config location is /etc/nomad.d.
For now, I will not change anything in here. I probably will play with TLS down the road, but since this is a lab, I am sticking to the defaults.
Starting up Nomad:
Last item I had to hit was install Docker. Went ahead and did that since I will be running containers on this.
At this point I am ready to get it up and running...
Just to note, I entered in the IP address to bootstrap the servers. Everything else is pretty much the default...
data_dir = "/opt/nomad/data"
bind_addr = "0.0.0.0"
server {
enabled = true
bootstrap_expect = 1
server_join {
retry_join = ["192.168.39.109"]
}
}
client {
enabled = true
servers = ["127.0.0.1"]
Once I got the service running on each I checked the UI to confirm all have been joined...
I did notice when checking the clients and their driver status that I must have missed the Docker engine on one of them. I'll jump back in and get that cleaned up.
Well that is it for the night. It is getting late and HashiConf starts in two days :)
Cheers,
lykins
This content originally appeared on DEV Community and was authored by lykins
lykins | Sciencx (2024-10-13T03:25:36+00:00) Setting up the Nomad Cluster. Retrieved from https://www.scien.cx/2024/10/13/setting-up-the-nomad-cluster/
Please log in to upload a file.
There are no updates yet.
Click the Upload button above to add an update.