This content originally appeared on flaviocopes.com and was authored by flaviocopes.com
If you connect the + and - poles of a battery with each other, the amount of current flowing will be too much and would damage the battery. The electrical flow is too much to handle.
We need to introduce the concept of resistance, a restriction to electrical flow.
Resistance limits the current flowing in a circuit. Every component in a circuit has some resistance. Even the wire has some resistance, but it’s very very low.
Resistance is measured in ohms (Ω).
1 ohm is defined as 1 volt divided by 1 ampere:
1 Ω = 1 V / 1 A
This is what we call Ohm’s law: R = V / I, where R is the symbol for resistance, V is the symbol for voltage and I is the symbol for current.
From this we can derive that:
V = R * II = V / R
A resistor is a component that’s created exclusively to provide a certain amount of resistance.
We have resistors of various values. Common ones you will find used in circuits are 220Ω, 1kΩ, 4.7kΩ, 10kΩ, and so on.
Given Omh’s law, we can calculate the current flowing in a circuit when you know the voltage provided by the battery, and the resistance that’s provided by the circuit components.
If the battery provides 5V and the circuit provides a 1kΩ resistance, The current flowing will be 5mA.
This content originally appeared on flaviocopes.com and was authored by flaviocopes.com
flaviocopes.com | Sciencx (2020-12-14T05:00:00+00:00) Electronics Basics: Resistance. Retrieved from https://www.scien.cx/2020/12/14/electronics-basics-resistance/
Please log in to upload a file.
There are no updates yet.
Click the Upload button above to add an update.