This content originally appeared on SitePoint and was authored by Daniel Schwarz
Historically, HTML forms have been quite tricky — firstly, because at least a little bit of JavaScript was required, and secondly, because no amount of CSS could ever make them behave.
However, this isn’t necessarily true in the case of the modern web, so let’s learn how to mark up forms using only HTML and CSS.
Form-ing the basic structure
Start off with the <form> element.
Nothing fancy here. Just covering the basic structure.
<form>
...
</form>
If you’re submitting the form data naturally (that is, without JavaScript), you’ll need to include the action attribute, where the value is the URL you’ll be sending the form data to. The method should be GET or POST depending on what you’re trying to achieve (don’t send sensitive data with GET).
Additionally, there’s also the lesser-used enctype attribute which defines the encoding type of the data being sent. Also, the target attribute, although not necessarily an attribute unique to forms, can be used to show the output in a new tab.
JavaScript-based forms don’t necessarily need these attributes.
<form method="POST" action="/subscribe" enctype="application/x-www-form-urlencoded" target="_blank">
...
</form>
Forms are made up of inputs, which expect data values.
<form>
<input type="text"><!-- text input -->
<input type="text" value="Prefilled value">
</form>
See the Pen
Form 1 by SitePoint (@SitePoint)
on CodePen.
Including Labels for Better Usability & Accessibility
Every input needs a label.
A label is a text descriptor that describes what an input is for. There are three ways to declare a label, but one of them is superior to the other two. Let’s dive into these now.
Adjacent labels
Adjacent labels require the most code because we need to explicitly declare which input the label describes. To most, this is counterintuitive because we can instead wrap inputs inside labels to achieve the same effect with less code.
That being said, the adjacent method may be necessary in extenuating circumstances, so here’s what that would look like:
<label for="firstName">First name</label>
<input id="firstName">
As you can see from the example above, the for attribute of the <label> must match the id attribute of the input, and what this does is explain to input devices which text descriptor belongs to which input. The input device will then relay this to users (screen readers, for example, will dictate it via speech).
ARIA labels
While semantic HTML is better, ARIA (Accessible Rich Internet Applications) labels can compensate in their absence. In this case, here’s what a label might look like in the absence of an actual HTML <label>:
<input aria-label="First name">
Unfortunately, the downside of this approach is the lack of a visual label. However, this might be fine with some markups (for example, a single-input form with a heading and placeholder):
<h1>Subscribe</h1>
<form>
<input aria-label="Email address" placeholder="bruce@wayneenterpris.es">
</form>
(I’ll explain what placeholders are for in a moment.)
Wrapping labels
Wrapping inputs within labels is the cleanest approach. Also, thanks to CSS’s :focus-within, we can even style labels while their child inputs receive focus, but we’ll discuss that later.
<label>
First name<input>
</label>
Placeholders vs labels
A brief comparison:
- Labels state what the input expects
- Placeholders show examples of said expectations
Placeholders aren’t designed to be the alternative to labels, although as we saw in the ARIA example above, they can add back some of the context that’s lost in the absence of visual labels.
Ideally, though, we should use both:
<label>
First name<input placeholder="Bruce">
</label>
See the Pen
Form 2 by SitePoint (@SitePoint)
on CodePen.
Choosing Input Types
Placeholders only apply to text-based inputs, but there are actually a whole range of different input types, which include:
<input type="button">
<input type="checkbox">
<input type="color">
<input type="date">
<input type="datetime-local">
<input type="email">
<input type="file">
<input type="hidden"> <!-- explained later -->
<input type="image">
<input type="month">
<input type="number">
<input type="password">
<input type="radio">
<input type="range">
<input type="reset">
<input type="search">
<input type="submit"> <!-- submits a form -->
<input type="tel">
<input type="text"> <!-- the default -->
<input type="time">
<input type="url">
<input type="week">
Semantic input types are useful during form validation, especially when relying on native validation, which we’ll take a look at shortly. First, let’s learn how to style these inputs.
Styling inputs
Arguably the most infuriating aspect of coding forms is overriding the browser’s default styling. Thankfully, today, appearance: none; has 96.06% browser support according to caniuse.com.
After resetting the web browser’s default styling with the following CSS code, we can then style inputs however we want, and this even includes both the radio and checkbox input types:
input {
-webkit-appearance: none;
-moz-appearance: none;
appearance: none;
...
}
However, some of these inputs might come with quirks that are difficult or even impossible to overcome (depending on the web browser). For this reason, many developers tend to fall back to the default type="text" attribute=value if they find these quirks undesirable (for example, the “caret” on input type="number").
However, there is a silver lining …
Specifying an inputmode
With 82.3% web browser support according to caniuse.com, the new inputmode attribute specifies which keyboard layout will be revealed on handheld devices irrespective of the input type being used.
Better than nothing, right?
<input type="text" inputmode="none"> <!-- no keyboard ? -->
<input type="text" inputmode="text"> <!-- default keyboard -->
<input type="text" inputmode="decimal">
<input type="text" inputmode="numeric">
<input type="text" inputmode="tel">
<input type="text" inputmode="search">
<input type="text" inputmode="email">
<input type="text" inputmode="url">
Validating User Input
Should you choose native-HTML validation over a JavaScript solution, remember that inputmode achieves nothing in this regard. inputmode="email" won’t validate an email address, whereas input type="email" will. That’s the difference.
Putting this aside, let’s discuss what does trigger validation:
<input required> <!-- value is required -->
<form required> <!-- all values are required -->
<!-- alternative input types -->
<input type="email"> <!-- blank or a valid email address -->
<input type="email" required> <!-- must be a valid address -->
<!-- text-based inputs -->
<input minlength="8"> <!-- blank or min 8 characters -->
<input maxlength="32"> <!-- blank or max 32 characters -->
<input maxlength="32" required> <!-- max 32 characters -->
<!-- numeric-based inputs -->
<input type="date" min="yyyy-mm-dd"> <!-- min date -->
<input type="number" max="66" required> <!-- max number -->
Creating custom rules
Custom rules require knowledge of JavaScript regular expressions, as used by the RegExp object (but, without wrapping slashes or quotes). Here’s an example that enforces lowercase characters (a–z) and minlength/maxlength in one rule:
<input pattern="[a-z]{8,12}">
Note: front-end validation (native-HTML or otherwise) should never, ever be used as a substitute for server-side validation!
Styling valid/invalid states
Just for extra clarity, this is how we’d style validity:
input:valid {
border-left: 1.5rem solid lime;
}
input:invalid {
border-left: 1.5rem solid crimson;
}
form:invalid {
/* this also works, technically! */
}
Houston, we have a problem!
Inputs attempt to validate their values (or lack thereof) immediately, so the following code (which only shows the valid/invalid states while the input holds a value) might be better:
Continue reading A Guide to HTML & CSS Forms (No Hacks!) on SitePoint.
This content originally appeared on SitePoint and was authored by Daniel Schwarz
Daniel Schwarz | Sciencx (2020-10-05T19:27:40+00:00) A Guide to HTML & CSS Forms (No Hacks!). Retrieved from https://www.scien.cx/2020/10/05/a-guide-to-html-038-css-forms-no-hacks/
Please log in to upload a file.
There are no updates yet.
Click the Upload button above to add an update.